This was a fun project from summer of 2017. I built a Prusa i3 MK2S kit and decided it needed an enclosure, so I purchased some plywood and hacked one together. There isn’t a square edge on it, but you can’t really tell from a distance! I put together a lighting circuit and a print server with a raspberry pi on the side, so that I can print remotely from the LAN.
![](https://johnmcnelly.com/wp-content/uploads/2017/10/IMG_2076-1024x768.jpg)
![](https://johnmcnelly.com/wp-content/uploads/2017/10/IMG_2075-1024x768.jpg)
![](https://johnmcnelly.com/wp-content/uploads/2017/10/IMG_2074-1024x768.jpg)
![](https://johnmcnelly.com/wp-content/uploads/2017/10/IMG_2073-1024x768.jpg)
![](https://johnmcnelly.com/wp-content/uploads/2017/10/IMG_2071-1024x768.jpg)
![](https://johnmcnelly.com/wp-content/uploads/2017/10/IMG_2070-1024x768.jpg)
![](https://johnmcnelly.com/wp-content/uploads/2017/10/IMG_2069-1024x768.jpg)
![](https://johnmcnelly.com/wp-content/uploads/2017/10/IMG_2068-1024x768.jpg)
![](https://johnmcnelly.com/wp-content/uploads/2017/10/IMG_2065-1024x768.jpg)
![](https://johnmcnelly.com/wp-content/uploads/2017/10/IMG_2064-1024x768.jpg)